Services

2x Rear
Optimax red LED signal
light circuit board inserts.

YAMAHA
Royal Star 1996-2005
Road Star 1999-2003
V-Star 1998-2005
Venture

MOTOLED EPOXY SEALED LED
TAILLIGHT

Built in features for your increased
safety and visibility

Side LED's

Plate illumination

-48 Red Hyper bright /high flux LED's
with full running and brake functionality

03/26/06- NOW WITH EVEN MORE
LED'S FOR INCREDIBLE BRIGHTNESS
AND VISIBILITY
(64 high flux LED's = brightness of
192 regular LED's)

- Designed with maximum brightness for use
with stock red lens.

- 3 White LED for licence plate illumination
- 100,000 hours (11years) LED life expectancy
- Chromed circuit board
- Sealed in UV resistant clear epoxy
- 1 minute installation
- Consumes approximately 1/10th the current
power of a conventional 1157 bulb
- 3 year warranty

- Only $129USD
-



				RUNNING



			BRAKE



	FRONT VIEW



			TOP VIEW

Running

Brake

Turn (right)

NEW !
Integrated turn
signal LED taillight
- Guarantied to be the brightest
and most visible on the market.
- Signal side turn off LED's
between cycles
-Easy 10 minute installation
$179USD

1x LED Tail light (integrated)
1x Turn signal flash rate
controller (on board)
1x Quick connect turn
signal adapter wires

* Complete kit that installs in
just 10 minutes.

LED Combo #1
Tail and rear signals
-Convert your stock rear signals
to running and turn functionality.
-Easy 10 minute installation
$199USD

1x LED Tail light
2x RED LED signals
1x Turn signal flash rate
controller
1x Quick connect turn
signal adapter wires

LED Combo #2
Tail and rear signals
-Convert your stock rear signals
to running and turn functionality.
-Easy 10 minute installation
$199 USD

1x LED Tail light
2x YELLOW LED signals
1x Turn signal flash rate
controller
1x Quick connect turn
signal adapter wires

LED Combo #3
Tail and rear signals
-Convert your stock rear signals
to running and turn functionality.
-Easy 10 minute installation
$239 USD

1x LED Tail light (integrated)
2x RED LED signals
1x Turn signal flash rate
controller
1x Quick connect turn
signal adapter wires

LED Combo #4
Tail and rear signals
-Convert your stock rear signals
to running and turn functionality.
-Easy 10 minute installation
$239 USD

1x LED Tail light (integrated)
2x YELLOW LED signals
1x Turn signal flash rate
controller
1x Quick connect turn
signal adapter wires

YAMAHA

V-Star 650 / 1100 Custom

MOTOLED EPOXY SEALED LED
TAILLIGHT

-2x Optimax 24 Red Hyper bright /high flux LED's
with full running and brake functionality

- 3 White LED for licence plate illumination

- 100,000 hours (11years) LED life expectancy

- Chromed circuit board

- Sealed in UV resistant clear epoxy

- 5 minute installation

- Consumes approximately 1/10th the current
power of a conventional 1157 bulb

- 3 year warranty

- Only $99USD

Clear lens upgrade option

Dual color clear lens

Installed with Motoled LED board


	- Maximize LED performance - Unique dual color lens (Red sides to hide internals / clear in front) - Chrome look when used with LED board - Heady duty construction - Only $39USD

YAMAHA
Royal Star 1996-2005
Road Star 1999-2003
V-Star 1998-2005

MOTOLED OPTIMAX TURN SIGNAL LED
INSERT
Brightest 2 inch round LED cluster available

Wide angle

Easy installation

-24 Hyper bright high flux LED's (2 side
led's)
with full running and brake functionality

- Available in red or yellow

- 100,000 hours (11years) LED life
expectancy

- Chromed circuit board

- Sealed in UV resistant clear epoxy

- 1 minute installation

- Consumes approximately 1/10th the
current power of a conventional 1157 bulb

- 3 year warranty

- Only $39USD each




	Yellow	red






Digital camera's are unable to capture the true color of direct LED's. Actual colors are pure red or yellow






	WIDE ANGLE pattern



		Four 100deg center LED's

SIDE LED'S

Purchase items
seperatly or take
avantage of our
combo pricing.

Optimax signal light LED circuit board insert



	Available with Red or yellow LED's

		$39 USD

	Electronic flasher relay



Regulates the turn signal flash rate when using rear LED signal

		$12 USD

	Rear signal running light conversion adapter kit



Convert your Motoled rear LED turn signals to running lights with turn fonctionnality.

		$7 USD

	Load resister kit



	Regulates the turn signal flash rate when using both front and rear LED signal lights set

		$18 USD

		Clear turn signal lens



	Will maximize the LED brightness over stock amber or red lens

Combo #1
*Recommended for
highest visibility

-RED Rear signals
(single contact 1156 connection)

$99 USD

	1x Heavy duty electronic flasher relay

	1x Rear signal running light conversion adapter

Combo #2

-Rear signals (yellow)
(single contact 1156 connection)

$99 USD

	1x Heavy duty electronic flasher relay

1x Rear signal running light conversion adapter

Combo #3

-YELLOW front signals
(double contact 1157
connection)

$99 USD

1x Heavy duty electronic flasher relay

Combo #4
*Recommended for
highest visibility

YELLOW front signals
(double contact 1157
connection)-

-RED Rear signals
(single contact 1156
connection)-

$ 188 USD

2x Front Optimax Yellow LED signal light circuit board inserts. 2x Rear Optimax red LED signal light circuit board inserts.


	1x Rear signal running light conversion adapter


	1x Heavy duty load resister

Combo #5

-YELLOW front signals
(double contact 1157
connection)-

-RED Rear signals
(single contact 1156
connection)-

$ 188USD


	1x Rear signal running light conversion adapter


	1x Heavy duty load resister

LED PERFORMANCE CHART
Many buyers of LED replacement bulbs expect a brighter light to increase their visibility and safety. The reality however is
that many LED products use standard super bright 5mm LED that are often no brighter than a conventional filament bulb.
These pictures demonstrates how much more efficient MOTOLED high flux LED's are compared to other products available
on the market.

LED FACTS
- Standard 5 mm LED's have limited brightness by design and are usually inexpensive.
- Because most digital camera's have automatic settings, performance pictures of LED's can be very inaccurate and
misleading. What appears to be a very bright LED light picture may be in fact a mediocre brightness especially in a day
light setting. For accurate rating, the following chart demonstrates LED performance using a single manual digital camera
picture setting.
- A weak LED can appear very bright if it's angle of vision is a narrow (15 deg). This type of LED will greatly compromise
side visibility. Motoled circuit board include 90 deg side angled and/or some 100 deg LED's.
- Motorcycle tail and signal lens's diffuse light to improve visibility, this is why MOTOLED high flux LED's are designed to
deliver maximum LED brightness using these types of lens.

Installed

Running

Running with stock red
lens

Brake

Brake with stock red
lens

Motoled Optimax 24
-2 inch round board
-High Flux LED's
-Multifit in tail or signals
-Sealed in epoxy

Conventional 1157
filament bulb

32 super bright 5 mm
red LED cluster

12 super bright 5 mm
red LED bulb

Ship to U.S. and Canada by regular ground postal service flat fee of $8 / International shipping available

A 7% gst tax is applicable when shipping within Canada

Warranty- 3 year warranty from the date of purchase on manufacturing defects or workmanship. Warranty is not applicable against misuse or abuse.

Payment by Pay Pal, check (e-mail for details), cash.

Yamaha Royal/Road/V Star tail light